Say Hello Dickhead!

Lot’s  to talk about before nap time. I could not decide what to do with the turn signals. I wanted something different and I didn’t want a bunch of holes  in the fender. So this is what I came up with. I drilled into the sides of the tail light and mounted them there and ran the wire internally through the tail light. I like it a lot but it does look like someone with a dick growing out from between the eyes! If I could only get a license plate with a smiley face.

Geometry and physics, my two favorite subjects because there is no gray area, it is either a or b . With that in mind have you ever noticed how you can hold something heavy upright, like say a motorcycle, then you break that magical plane and go that half a degree to far…….Loving Physics!

Dickhead

Chasing down shorts

$6 dollar battery box

Well here you go, a 6 dollar piece of 22 ga  sheet metal, a little tubing, and some Styrofoam and vinyl tape. Why spend eighty dollars buying when you can build for six?

And of course the duo of “who me” and “not us”

Update

The battery box has been roughed out, not bad for 6 bucks and extra junk laying around. Will clean it up and paint it tomorrow. Also, going to get the fitting for the fuel cross over and fuel filter so after I bolt on the VOES I can drop the tank back on.
The plugs should be here Monday so I can finish that end of the wiring. Then the grueling wait for the parts to show up so I can get the rear signals on so I can get the rear tire back on so I can put the kickstand on and she can stand on her own for the first time.
Then its a matter of the exhaust and rear brake line and fluids and she will be ready to fire! WooHoo!

Brake Light Fixed

Brake light problem resolved. It now works like it should still with no ground....go figure.

It Is Alive!

Well the wiring is as done as it can be until I get the VOES for the carb. I did find a plug to replace the one Debo ate but it was from a commercial vendor and I had to buy 20 of them at 29 cents each then a $5 handling fee then $7 for shipping so I am in for about $18 on one plug. But I will have 19 spares.

Also the tail light comes on but not the brake but I think the problem is in the handle bar switch. Remember that is the side of the bars that were flat and the control housing doesn’t come completely together; so I think the hand lever is missing the switch. I will be looking at that as soon as I am done here.

Tail light…

Oil lines and pressure gauge installed and complete….

Current condition…

First signs of life!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Wired for Sound

Well the wiring is 99% completed. All I need is rear turn signals and a VOES switch for the carb and the wiring will be in the history books.

The last big challenge is to fabricate a battery box. After that its 2 brake lines a petcock (because one is never enough) and some chain and exhaust  and I will be done!

No pictures today as it is just a bunch of wires, but got a lot done over the last 2 days.

Getting back on track

Today I am going to finish as much of the wiring as possible. However, I still don't have rear turn signals and while I was off on my New York bender Debo decided to eat one of the plugs from the wiring harness. It's either the right or left side plug I haven't figured out which yet. It appears to be a relatively standard 8 wire automotive plug so I should be able to source one or a good substitute easily enough.
Then next paycheck should buy everything else I need to finish up this long overdue project.
Unless there are some unforeseen problems or massive back orders it will be ready to fire the the next 14 days or so. But enough babbling for now, I have 32 wires to extend and label:)
Here are a few New York City Pictures for you to peruse while I work!

Tommy's joke live from New York!

How do you turn a dishwasher into a snowplow?
Give her a shovel!

Be home soon for the last big push on the scoot!

Sick and slackin'

I apologize for the complete lack of attention to the blog. I ended up working 7 days in a row then got sick. I have done nothing on the bike but have every intention of finishing the wiring tomorrow. And getting it back together before I leave for new York.

Rigatonni ala Tesla

Or as it is more commonly called, electrical spaghetti. I really did not think it would take this long. But I was wrestling with a tail light/ground issue. If, and that's a big if, I understand it right. The tail light is the only thing not grounded on the back half of the harness. And the doubt is slowing me down.