Update

The battery box has been roughed out, not bad for 6 bucks and extra junk laying around. Will clean it up and paint it tomorrow. Also, going to get the fitting for the fuel cross over and fuel filter so after I bolt on the VOES I can drop the tank back on.
The plugs should be here Monday so I can finish that end of the wiring. Then the grueling wait for the parts to show up so I can get the rear signals on so I can get the rear tire back on so I can put the kickstand on and she can stand on her own for the first time.
Then its a matter of the exhaust and rear brake line and fluids and she will be ready to fire! WooHoo!

Brake Light Fixed

Brake light problem resolved. It now works like it should still with no ground....go figure.

It Is Alive!

Well the wiring is as done as it can be until I get the VOES for the carb. I did find a plug to replace the one Debo ate but it was from a commercial vendor and I had to buy 20 of them at 29 cents each then a $5 handling fee then $7 for shipping so I am in for about $18 on one plug. But I will have 19 spares.

Also the tail light comes on but not the brake but I think the problem is in the handle bar switch. Remember that is the side of the bars that were flat and the control housing doesn’t come completely together; so I think the hand lever is missing the switch. I will be looking at that as soon as I am done here.

Tail light…

Oil lines and pressure gauge installed and complete….

Current condition…

First signs of life!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Wired for Sound

Well the wiring is 99% completed. All I need is rear turn signals and a VOES switch for the carb and the wiring will be in the history books.

The last big challenge is to fabricate a battery box. After that its 2 brake lines a petcock (because one is never enough) and some chain and exhaust  and I will be done!

No pictures today as it is just a bunch of wires, but got a lot done over the last 2 days.

Getting back on track

Today I am going to finish as much of the wiring as possible. However, I still don't have rear turn signals and while I was off on my New York bender Debo decided to eat one of the plugs from the wiring harness. It's either the right or left side plug I haven't figured out which yet. It appears to be a relatively standard 8 wire automotive plug so I should be able to source one or a good substitute easily enough.
Then next paycheck should buy everything else I need to finish up this long overdue project.
Unless there are some unforeseen problems or massive back orders it will be ready to fire the the next 14 days or so. But enough babbling for now, I have 32 wires to extend and label:)
Here are a few New York City Pictures for you to peruse while I work!

Tommy's joke live from New York!

How do you turn a dishwasher into a snowplow?
Give her a shovel!

Be home soon for the last big push on the scoot!

Sick and slackin'

I apologize for the complete lack of attention to the blog. I ended up working 7 days in a row then got sick. I have done nothing on the bike but have every intention of finishing the wiring tomorrow. And getting it back together before I leave for new York.

Rigatonni ala Tesla

Or as it is more commonly called, electrical spaghetti. I really did not think it would take this long. But I was wrestling with a tail light/ground issue. If, and that's a big if, I understand it right. The tail light is the only thing not grounded on the back half of the harness. And the doubt is slowing me down.

Update

Not much has gotten done lately. The motor mount was supposed to include the mounting hardware and didn’t so it’s not on. The wiring harness was supposed to be universal but did not include pigtails to go to the left and right hand controls so I am short  about 80 feet of wire. At first I was going to just cut off the excess wire from the rear harness and splice it to the hand controls, but if I had a short later I would never be able to tell which wire went where if the colors did not match. So I will have to purchase more wire on payday.

Parts have arrived

Well the limited number of parts I ordered came yesterday. I probably won't have time to install them until this weekend. I need to pick up a soldering iron and oil lines and plug wires from the store and the oil tank and system will be complete and the electrical will be complete with the exception of the battery.